DAP DCL-2 MKII

The DAP DCL-2 is a versatile device for a wide range of applications: It is suitable as 2-way Crossover for 1 Subwoofer and 2 Satellites. You can adjust the frequency (20 Hz - 250 Hz) and the delay (0-3,5 ms or 0 mm - 1201 mm or 0 ft - 3,945 ft) from the Subwoofer and the Satellites separately. Phase rotation is 0 degree or 180 degree. Furthermore, this device is suitable as Stereo Compressor/Limiter with user defined Attack-Delay, Hold-Time adjustable. To avoid distortion, it is provided with Notch and Low-cut Filter. You can adjust it by Computer (MIDI Control).

24-bit S-D (Sigma Delta) A/D, D/A Converter, 48 kHz
Sampling rate
Stereo Compressor/Limiter/ Noise-gate with subwoofer output
3 kinds of output mode: 1. Two inputs, two outputs; 2. Two
inputs, two outputs + sub; 3. Two inputs, three outputs
Notch and low-cut filter to prevent harmonic distortions
20 10 programs: factory pre-set, 17 10 user definable programs
MIDI Control; 2x 16 character LCD with backlight

Analog Inputs
Connectors: XLR and 1/4" jack
Type: RF filtered, servo balanced,
20 kilo-Ohm unbalanced
Impedantie: 40 kilo-Ohm balanced,
20 kilo-Ohm unbalanced
Nominal Operating Level: -20 dB to + 4 dB

Analog Outputs
Connectors: XLR and 1/4" jack
Type: Electronically servo-balanced
output stage
Impedantie: 66 Ohm balanced,
33 Ohm unbalanced

System Specifications
Freq. response: 20 Hz ~ 20 kHz, ±1 dB
Dynamic Range: >112 dB, 20 Hz ~ 20 kHz
THD: <0,065%, @ 1 kHz, 0 dB

Compression
Threshold: -61 dB ~ 0 dB, 1 dB step
Ratio: 1.0 ~ Limit
Detect Time: 0~350 dB/Sec
Attack Time: 0~100 ms
Decay Time: 0~350 dB/Sec

MIDI Interface
Type: 5-Pin-DIN-Socket

Digital Processing
Converters: 24-bit Sigma-Delta
Sampling Rate: 48 kHz
Display: 2 x 16 LCD Display

Power supply
Mains supply: 110-120V, 200-240V,
50-60 Hz 90-250Vac 50/60 Hz
Fuse: 110-120VAC: 1A (slow-blow);
200-240VAC: 125 mA (slow-blow)
Power consumption: 10W
Mains connection: Standard IEC receptable

Dimension: 483 x 170 x 45 mm (LxBxH)
Gewicht: 2,34 kg